Why Error: Drive not ready comes?

This same thing happens to my friend.One day he installed some file(.exe).The file installed properly but the next day when he starts his computer he got a error “Drive not ready”.This happens due to installation of that unknown file(.exe,.bat).Another Reason:This can be due to many reasons like the media reader, USB external drive,floppy. Just go into device manager and disable the floppy drive.This problem is not due to your hard disk problem.Mainly disabling problematic device is solution.
 
Basic Steps:

1. Use anti-virus,anti-spyware,anti-adware check.
2. Do the windows disk cleanup & error checking.
3. Use Pc repair software to repair.

Pc repair Software Download -:

1. Defragment your Hard Drive.

Advanced Steps:
Goto:
Start –> Control panel –> System –> Hardware tab –>Device Manager –> Check for drives(Disk Drives,Floppy Disk Controllers).Check for any Exclamation mark or any yellow symbol or any warning symbol.If You find that then click on it,they will tell you what is the cause for that error.Then if you still can’t find the solution then just tell me about the error by posting,i will try to solve it.
Cause:

• If the drive diskette is not inserted properly or the drive door is not closed then it occurs.
• This can happen due to the bad disc(Due to reading problem). 
• If the Power Connection and the Daisy Chain of the drive is not connected properly then the error comes.
• If the Cable Connection of the drive is loose or setup is not correct then it comes.
• If the drive is totally damaged then it sends the error massage.

 
Solution:

• If the problem is of Drive Diskette or not closed Drive Door then you should insert the Drive Diskette properly and you should also close the drive door.

 

• If the problem is of the Power Connection and the Daisy Chain is loose then you should connect them correctly.
• If the cable connection is loose and the setup is not correct then the cable connection should be connected properly and the setup should also be correct.Open your system unit(Cabinet),check the wire connected or not also check for the power connection.

 

• If the Drive is totally damaged then your should replace it with a new one by checking all the things above. 

You Will also like to see:

• Why CMOS BATTERY STATE LOW message comes?
• Why CMOS MEMORY SIZE MISMATCH ERROR Comes.
• Invalid Configuration please run setup program.
• CKSUM ERR(checksum error)

I’m getting Error message: Track O Bad.

It doesn’t happened with me but yes this can occur in any PC.The necessary reasons behind this and how To solve this problem(I’m getting Error message: Invalid media/Track O Bad.) is Listed Below:

Cause:

• If the diskette is damaged then the error comes.
• If there is any problem in the Head of the Disk Drive then it occurs.

Solution:

• If the problem is of the damaged track of the diskette then you should check it by giving the Format Command  on a Blank Diskette Drive. If the Diskette is then readable or Formatable then the Diskette is damaged. For that you should replace it with a working one.
• If you want to try to save the diskettes (verify that they are really bad):
  - Cleaning the heads on the drive.
  - Formatting in another drive (with clean heads of course).
  - Bulk-erasing the diskette.
• You can Try formatting that disk.
• If the Diskette is not readable or Formatable after doing the test written above then the Diskette is right and the problem is of the Drive. For this you should clean the Head by using the HEAD CLEANER. If it not work then you should service the Drive. If it also not work then the Drive is totally damaged and then you should replace it.
• Now U can Try this out AS your last weapon:                          Flobo Hard Disk Repair Portable:

View Out look:

Flobo Hard disk  Repair  is basically bad sector removal and repair software that removes the logical bad sectors and repairs Track 0 Bad Disks. Bad sectors are a major problem in hard disks, which are found to be mainly logical in nature. Disk Repair is a utility to remove/repairs logically formed bad sectors from Hard Disks and Floppy Disks with FAT12, FAT16, FAT32, VFAT, NTFS and NTFS5 File system and all versions of MS Windows support.

Download Link –>

 

Related Posts:

• Monitor Display without Color.
• Power coming to monitor without display.
• Screen Display not coming but it beeps.
• Why I get shock from My Computer.

                

Insert System disk and Press anykey to continue.

This is a very fatal error. It can even cause certain damage to ur Hard Disk.U might have to load Operating System again.So be careful about this error!

Why this(Insert System disk and Press anykey to continue.) error occurs?

• Operating System File can be deleted from HARD DISK.

• Hard Disk can be damaged.
• Daisy chain and Power connection might not be proper.

How to solve this ERROR?

• First from the SETUP UTILITY You have to press the IDE HDD Auto Detection.If it can detect the HARD DISK then the HARD DISK is fine(HARD DISK motor is properly working or not).In this case from a bootable disk you have to boot computer and from floppy disk/CD/DVD drive you have to transfer system files to HARD DISK.
• If from the SETUP UTILITY by pressing the IDE HDD Auto Detection it can’t detect HARD DISK then you must have to check that connections are properly working or n’t.
• If this all doesn’t work then your Computer HARD DISK might be damaged.You have to repair/Replace it.

 

• Screen display not comming but it beeps.
• Why computer hangs and how to fix it.
• Why PC Crashes.
• Memory high address line at [xxx], Read [xxx] expecting [xxx] Memory parity failure at [xxx-xxx] Memory read/write failure at [xxx], Read [xxx] expecting [xxx]
• Why CMOS BATTERY STATE LOW message comes?
• Why CMOS MEMORY SIZE MISMATCH ERROR Comes?