PRTY ERR (Parity Error)

Cause: At the time of Power On self Test(POST) every SIMM’s Parity bit is set/reset.By that it is checked that the bit can transfer to which status.When PRTY ERR (Parity Error) this error comes then one or one more SIMM is unable to Clean the Parity Bit.

















Solve:1) when this (Parity Error) error comes u have to see that the memory card is properly
installed/configured or n’t.You have to make it right.






2) If the Error Message is still there then the problem might be of system memory.For that one or more SIMM Defect can be there which can be replaced with a working SIMM.

Memory high address line at [xxx], Read [xxx] expecting [xxx] Memory parity failure.

Yes sometimes it happen when you open your computer you suddenly got a error “Memory high address line at [xxx], Read [xxx] expecting [xxx] Memory parity failure at [xxx-xxx] Memory read/write failure at [xxx], Read [xxx] expecting [xxx]”

Why this error Comes ?

• Ram chip/SIMM/DIMM module is not properly set/inserted.
• Ram chip/SIMM/DIMM module can be damaged.

How to solve this problem ?

• If the Ram chip is not properly attached(in case of SIMM it will be Memory Bank) in the Ram Socket then this message can arrive.

          So you have to see that the RAM chip/SIMMroperly attached or not. If not then open it and fix it well.If it doesn’t work then do the following.

• You have to also see that RAM chip/SIMM is damaged or not.If it is damaged then u have to replace it with another RAM chip but it should have to be of same module.